An influence connector on an ASUS MEGALODON GeForce RTX 3060 Ti has burned out, drawing important consideration. This difficulty is stunning as a result of this graphics card has a TGP (Complete Graphics Energy) of solely 200 watts. That is a lot decrease in comparison with the 450 watts or almost 600 watts consumed by the GeForce RTX 4090 and GeForce RTX 5090, which have confronted comparable issues.
A 16-pin energy connector can provide as much as 600 watts of energy. When working beneath 300 watts, the connector is normally in a protected vary, making it most unlikely that it might burn out. Nevertheless, regardless of this, the cable burned, sparking hypothesis and feedback that it might need been attributable to consumer error. However now, the trigger is obvious.
The Actual Explanation for the Burnt Connector
It was not a consumer error when connecting the cable, which is a typical difficulty when a 16-pin cable burns. What truly occurred is that the consumer of this ASUS MEGALODON GeForce RTX 3060 Ti was utilizing a 12-pin energy cable as a substitute of the right 16-pin cable. This 12-pin cable lacks the 4 management pins which are discovered within the 16-pin cable.
These 4 management pins are important for correct energy detection and making certain the graphics card receives the right energy. From the consumer’s feedback, it appears that evidently the graphics card got here with an adapter that includes two 8-pin connectors to a 12-pin connector, as a substitute of together with an adapter to a 16-pin connector.
Why This Occurred Regardless of the 12-Pin Cable
The difficulty lies in using the mistaken cable, which is uncommon as a result of even with a 12-pin cable, this shouldn’t have occurred. The cable ought to have been able to dealing with the 200-watt TGP. This has led some customers guilty the proprietor of the graphics card, speculating that there might need been an set up error or improper insertion of the connectors.
