A720 AD
ID-Cooling has up to date its A720. It’s calling it the A720 AD and it’s focusing on the higher-end market however nonetheless making an attempt to be reasonably priced at round $70. It represents a severe overhaul from the A720 that we’ve examined earlier than, which was one of many high performers for its worth. It was aggressive with Noctua and was cheaper. The up to date A720 now has pogo pins to ship energy to the fan. This implies the fan doesn’t have a cable.
ID-Cooling has additionally soldered the finstack to the heatpipes. That is one thing a pair corporations are doing now. A few of them declare that this provides no efficiency enchancment whereas others do declare a efficiency uplift. ID-Cooling says that, in a like-for-like situation evaluating the previous A720 with the brand new one, the corporate is seeing a few 2 diploma enchancment at 280 watts.
The A720 AD makes use of PBT followers. The costliest followers sometimes use LCP, which makes use of a liquid crystal materials within the center for the blades. Generally they’ll do LCP for the inside and the outer a part of the fan. That is what Noctua has finished for its tremendous costly followers the place the corporate is making an attempt to get the tip-to-frame clearance as small as potential, hitting clearance numbers like .6mm or .8mm. This low of a clearance requires LCP or steel. ID-Cooling is utilizing PBT, which helps with the value. The corporate tells us it’s purported to be 30% fiberglass bolstered, which helps keep the rigidity because the fan blades stretch in direction of the inside partitions of the body over time.
620 AD
We examined ID-Cooling’s 620 up to now as effectively. It competed fairly intently with ID-Cooling’s older AK620, however the firm confirmed off its new 620 AD. Just like the A720 AD, the corporate is soldering the fin stack to the heatpipes so there’s some enchancment from that and it additionally strikes to a more recent fan design.
We requested ID-Cooling what’s the largest factor it’s making an attempt to vary with its revised coolers, and the corporate advised us acoustics is the number one grievance it acquired. So the corporate has reshaped its blades to characteristic a extra gradual curve to mitigate this problem. ID-Cooling has additionally modified the blade angle on the hub. We goal to check all of this as quickly because it turns into obtainable. It is going to be $55 and the corporate hasn’t introduced a launch date but. We think about it would come out round This fall.
The 620AD provides 3 totally different ranges for the RAM clearance on the entrance, which will be adjusted and clipped in.
The skin fan is 28mm and the within fan is 30mm. This enables the cooler to keep up the next static strain by the fin stack, particularly with the dual-tower fin stacks.
410 TD
ID-Cooling already has its 410 collection of coolers, however the firm confirmed off its 410 TD at Computex. The TD stands for temperature show. This does improve the value a bit of and can supposedly make the 410 TD a $35 cooler. It has a temperature digital show that exhibits the CPU temp. The finstack thickness has additionally modified with the TD mannequin transferring to 50mm. The heatpipes are all utilizing a composite powder and groove model.
It’s additionally made modifications to the chilly plate the place ID-Cooling is making an attempt to push the 4 heatpipes as shut collectively as potential. It’s not as spectacular as we noticed at Scythe’s Computex sales space, the place Scythe principally conjoined all of them into one direct contact pad, however they’re getting nearer.
ID-Cooling Liquid Coolers
ID-Cooling confirmed off a bunch of liquid coolers at Computex 2025, although not as a lot as at Thermalright’s sales space.
SL 360 V2+
One of many liquid coolers, the SL 360 V2+, instantly jumped out at us as a result of its followers are a unique width than the radiator. That’s irregular. The followers are 120mm however the radiator measures 140mm broad and it was finished to include LED lights on the perimeters of the followers.
To compensate for the smaller followers, ID-Cooling has added 2 water channels. ID-Cooling additionally added extra liquid. Between the tank and the additional channels, it finally ends up with 36g extra liquid. The propylene glycol proportion is round 15%. The rationale that’s essential is that the extra distilled water there’s within the loops, the higher the cooling efficiency is. Propylene glycol helps with issues like chilly storage, transit, freight, and chilly temperatures, however going too excessive with that compromises efficiency. 15% is a bit of on the decrease finish, which is an efficient factor for efficiency. The followers are AP120s and are 28mm thick. ID-Cooling tells us the cooler could have a 6-year guarantee and that the floor space has been elevated by about 15% in comparison with conventional 360 setups as a result of measurement change. The cooler is meant to be $190 when it comes out.
Sadly, the cooler doesn’t include an offset bracket, and we’ve requested that ID-Cooling embody one.
ID-Cooling knowledgeable us that there’s a .5mm hole between the underside of the microfins and the underside of the chilly plate. Lian Li is experimenting with .3. The draw back to that, or one thing smaller, is there may very well be extra flex/extra weak point. The upside is the efficiency can be higher since you’re getting the liquid and the microfins nearer to the warmth supply, which is the CPU IHS.
FX 360 TD Black
At $80, the FX 360 TD Black is the most affordable liquid cooler ID-Cooling confirmed off. It provides a 360mm cooling setup that’s 27mm thick, which is normal.
With an LCD display, it’s $90. And it’s a 240×240 display.
DX 360
The corporate’s DX 360 liquid cooler provides a thicker 38mm radiator. It’s purported to be $120 with its 2.8-inch LCD display. Launch is TBD.
DX 360 GDL
We noticed a prototype of the DX 360 GDL on the present. The important thing factor about this liquid cooler is that it has very quick 100mm-length tubes. They exit from the block and go proper into the radiator. The draw back to this design is that it forces you to place your radiator on the high, which will be problematic in a super-tall case. The profit to this design is that it appears clear.
ID-Cooling has additionally added 82 grams of extra liquid by altering the radiator measurement, which is 130mm broad and has 120mm followers which are 27mm thick.
Its cap can be magnetic and pulls proper off, which exposes the highest of the tubes and the remainder of the cooler’s block.
