Phanteks Matrix Instances
We’ve talked about Phanteks’ X2 case prior to now however the firm was exhibiting off its new Matrix model, which has matrix LEDs. The X2 Matrix has 900 LEDs in a 10×90 structure. It’s purported to be about $30 to $40 dearer than the bottom X2, which implies it ought to find yourself round $200.
The attention-grabbing factor in regards to the case is that the LEDs wrap across the chassis. By way of communication, the LEDs hook up with the motherboard by way of USB 2.0 and use SATA for energy. This permits Phanteks to bypass a WinRing 0 kind scenario.

One other Matrix case had 600 of them in a 10×60 LED configuration and is meant to be about $120.

Phanteks additionally has software program that means that you can reconfigure what the LEDs show. Once we acquired to the corporate’s suite, it had been programmed to say, “Avid gamers Nexus right here,” which was cool to see.

We additionally noticed that the LEDs will also be used to focus on CPU temperature.
Phanteks G370A

Phanteks additionally confirmed off its G370A case, which is a $60 case that features 3x120mm followers within the entrance coupled with a mesh entrance that provides 38% gap porosity. The corporate tells us that manufacturing sometimes provides round 25% porosity.
It has a glass aspect panel and the again aspect panel of the case is simply metal and has no air flow.
Looking on the placement of the entrance followers, we requested Phanteks why they weren’t larger on the case so the underside fan might get extra publicity to the underside energy provide shroud space and the reply the corporate gave us was merely clearance for a 360mm radiator on the high.
There’s not lots of room for the air coming into the shroud. A few of it’s going to undergo the cable pass-through if it’s empty.

The again of the case encompasses a drive mount.
XTM3
The corporate additionally confirmed off a Micro ATX case referred to as the XTM3. It comes with 3 followers and is $70. For its entrance panel, it has a novel punch out for its followers.
The highest panel is an element customary air flow but it surely does have one aspect that gives much less airflow, which covers the place the PSU would exhaust out of. The aspect panel does have punch-outs for the PSU, nonetheless. We don’t take a look at energy provides, although that will change sooner or later. Energy provides can take lots of thermal abuse, nonetheless, so we’re not tremendous involved right here.
The case ought to be transport within the subsequent month or so and is 39.5 liters, which incorporates the ft. We admire that as not lots of corporations will issue that in.
There’s additionally lots of cable administration depth on the again and the case additionally helps BTF. As well as, there’s a panel that clamps down all the energy provide cables.
T30 Fan
Phanteks’ T30 fan took the corporate 6 years to make and is a 140mm fan. The corporate is competing with Noctua within the high-end fan area, however goes for a gray theme as a substitute of brown.
Phanteks CTO Tenzin Rongen Interview


Lastly, we interviewed Phanteks CTO Tenzin Rongen to debate technical particulars behind the corporate’s long-developed followers. Be sure to test it out in our video.




