Cooler Grasp MF Instances

The case comes with a entrance panel that has a mud filter in it.
With all of it assembled, it appears to be like just like the instances within the picture above. The instances are the MF sequence, with the biggest one being the MF600, which we assume interprets to “Motherf***ing 600.” There’s additionally the MF500 and the smaller MF400.

Initially, Cooler Grasp is principally going to be promoting pre-configured fashions. Finally, the corporate needs to permit folks to customise the case on their web site and have it assembled and shipped from across the Metropolis of Business. It’s fairly cool because it’s a completely modular strategy.

The facet panels are secured to the case through magnets, which is definitely a pleasant contact.
Internally, the MF600 we noticed got here with 3x140mm followers on the entrance and 1x120mm fan on the again. The motherboard tray is fairly normal for probably the most half. Exceptions embody a rail system that gives quite a few holes for screws to go in, which permits Cooler Grasp to reconfigure issues.
Contained in the case in the direction of the again, there’s additionally a rail system, which kinds bits and items of the motherboard tray that enable for extra customizability.
Cooler Grasp has been sort of on-and-off within the DIY area over time the place they’ve had some actually huge wins and a few actually huge losses. They have been additionally sort of absent for some time, however these MF instances signify a greater exhibiting from what we’ve seen shortly from the corporate.
Based on Cooler Grasp, a pre-configured MF600 is meant to price $200. We count on to check and evaluation the case.
The MF500 is meant to go for $165 and consists of 2x200mm followers within the entrance and 1x120mm fan within the again.
The smallest MF case, the MF600, which is a really massive micro ATX field, goes for $150. When it comes to followers, it has 2x120mm ones on the backside coupled with a 1x120mm fan within the rear.
Cooler Grasp additionally confirmed off completely different panel varieties they’re experimenting with. One among them included a facade-style stone.
One of many pre-built MF instances we checked out had stuff flipped round in an inverted structure. One of many advantages of its rail system permits the case to have a bar that screws through which can assist the GPU. Trying into this technique, you’ll be able to see that the PSU is on the backside subsequent to a backside consumption fan.
Up to date Cosmos


Cooler Grasp’s up to date Cosmos has the NVIDIA-like DGX fashion entrance.
We additionally noticed a variant of the Cosmos with thermal baffles in it. We now have some criticisms of its execution, however general, it’s an fascinating concept.
The best way the baffles are designed, Cooler Grasp is attempting to carry air straight in via its channels. There’s a channel for the CPU that exposes the fin stack and Cooler Grasp’s V8 CPU cooler. It conveys an concept just like an engine cowl.
The GPU has a separate baffle beneath the CPU one. The corporate is attempting to isolate air move. In idea, this could work nicely and we’d love this concept utilized to extra reasonably priced instances, just like the MF sequence, particularly since they’re already sort of configurable.
Trying on the again, followers may be mounted on the rear, which might help pull air out.
We additionally noticed one other variant of the Cosmos case operating liquid cooling with a distro block. It was coupled with 4x180mm followers and a “720” radiator, which pulled air into the case. Sadly, the air is blowing straight into the wall of a motherboard tray, however Cooler Grasp says the plan is to tug the air up and out of the case with extra 180mm followers on the highest and to maneuver the PSU in the direction of the underside of the case.
Trying nearer on the entrance of the particular version of the Cosmos instances, we are able to see the NVIDIA DGX shroud, which Cooler Grasp manufactures. It’s basically like a sponge-like mesh.

The particular version of the Cosmos doesn’t have a worth but, however the non-special version variant is meant to be round $400, which is earlier than any potential tariffs.
Cooler Grasp Coolers
Cooler Grasp confirmed off some CPU air coolers that had some 3D warmth pipes, which had extra warmth pipes protruding from the middle.
The corporate additionally confirmed off its V8 cooler and a full-metal fan. The fan’s blades and body are each aluminum.
Cooler Grasp Elite Sequence Instances

Cooler Grasp does some actually cool sh*t however has a branding downside. As an example, the corporate’s “Elite” sequence instances, proven within the picture above, are literally finances instances. From left to proper, we imagine they’re known as the Elite 482 ($50), Elite 600 ($65), Elite 490 Wooden ($50), Elite 691 Wooden ($60), Elite 693 ($60), Elite 692 ($70), Elite 302 ($40), and Elite 502 ($60). Our recommendation to Cooler Grasp right here is for them to unf*ck these names.

A lot of the Elite sequence instances don’t include followers except for the Elite 302 and Elite 502, which include 3 ARGB followers.
MF360
Subsequent up are Cooler Grasp’s MF360 instances, which conveys you can see contained in the case from all sides. Whereas it’s going to have some thermal challenges, to present the corporate credit score, it’s truly actually good wanting.
The MF360 is a showcase fish-tank fashion PC you can see via from either side. Contained in the case, we noticed a distro block and tubes routed via on either side.
Cooling X
The case within the picture above, which matches by “Cooling X,” and makes use of the corporate’s new MF body system. In the event you take a look at the nook, you’ll be able to see the person columns. At Computex, we noticed it as a pre-built system.
The highest of the case has a magnetically hooked up panel, which simply pulls proper off. The panel itself supplies actually good porosity and the fabric is fairly good. Eradicating the highest panel exposes 2 offset followers. The again fan tries to tug in air with the entrance fan attempting to exhaust air out of the highest, which is why they’re offset. That’s sort of cool to see.
Cooler Grasp Followers
Cooler Grasp confirmed off all-aluminum followers, which embody the blades and body. The MF120 XT is a 120mm mannequin, is meant to be $35, and the corporate says it goes as much as 4,000 RPM.
The fan’s RPM can be button-controlled through an exterior distant and it makes use of a dual-ball-bearing resolution.
Cooler Grasp’s blended followers, which use plastic blades coupled with an aluminum body, include fluid dynamic bearings (FDBs). The clearance between the fan blade tip and the body is essential because the smaller that clearance is, the higher efficiency you get. The main draw back is that because the fan ages, it may possibly begin to clip the inside of the body. Having it too shut can even negatively impression yields. The answer to that is LCP, which is extremely costly, or metallic, as a result of it doesn’t deform, however that’s additionally costly. Proper now, Cooler Grasp says it’s a couple of .8mm distance, which is fairly good. The corporate is focusing on 0.6mm by the point the fan launches.
Cooler Grasp Video Card Shroud

Cooler Grasp additionally confirmed off some video playing cards, which isn’t one thing the corporate is often concerned with.
Cooler Grasp created a GPU shroud with adjustable slats that may accommodate 15-30mm followers. This resolution is geared in the direction of pre-built PCs and isn’t deliberate to be offered individually.
Analyzing one of many followers, we noticed a normal 25mm-thick fan, which Cooler Grasp’s GPU shroud resolution can alter to through completely different notch choices.
Cooler Grasp can also be utilizing a vapor chamber, which is supported by 8x8mm warmth pipes operating via the shroud and a big fin stack. In whole, it weighs virtually 7 kilos (3.2 kilograms).
Cooler Grasp claims that, when it comes to cooling, it performs just like the 4-fan Astral resolution at decrease noise ranges, however we don’t have these numbers.
With 4,000 RPM followers operating on a 600-watt warmth load, Cooler Grasp claims a 5090 will run at about 49 levels C or so for the GPU.






















