The Nitecore EDC07 flashlight is a flat mild that gives Nitecore’s neat multi-color temperature (MCT) emitters. You get cool, impartial, and heat in a single mild!
Official Specs and Options
Right here’s a referral hyperlink to the Nitecore EDC07 flashlight product web page.
Variations
There’s only one model of the Nitecore EDC07 flashlight, however it’s out there in a tan physique (seen on this submit) or black.
Worth
Listing worth for the Nitecore EDC07 flashlight is $45.95, and it’s out there now at NitecoreStore.com.
What’s Included
- Nitecore EDC07 flashlight
- Charging cable
- Lanyard (with set up helper)
- Handbook and different papers
Package deal and Handbook
Construct High quality and Disassembly
The Nitecore EDC07 flashlight is one other flat mild. This one affords just a few fascinating issues. Extra on these issues later, however since that is the construct high quality and disassembly part, I’ll word that I didn’t disassemble the Nitecore EDC07 flashlight in any respect. There are 4 screws on the again the place it might in all probability be disassembled, although.
The construct high quality is nice. I actually like this mild, and that has loads to do with how the plastic physique feels within the hand. It’s not heavy, nevertheless it additionally manages to not really feel low cost, too. It’s a win.
Dimension and Comps
Dimensions L-4.72″ x W-1.22″ x H-0.83″
Weight 2.47 oz
Right here’s the sunshine in hand:
Right here’s the take a look at mild with the venerable Convoy S2+. The model beneath is a customized laser-engraved Convoy S2+ host by GadgetConnections.com. I did a full submit on an engraved orange host proper right here! Or go straight to GadgetConnections.com to purchase your Convoy S2+ now!
Additionally within the photograph above, my Commonplace Reference Materials (SRM) flashlight is the Hanko Machine Works Trident, an 18350 mild. Whereas I’ve not reviewed or examined the Gunner Grip model seen right here, I’ve examined a Hanko Machine Works Trident Whole Tesseract in brass. I really like the Trident, and it’s a hanging distinction to the cheap Convoy S2+, one other nice SRM.
Retention and Carry
The Nitecore EDC07 flashlight has a screwed-in pocket clip. I believe these two screws are structural, too. I believe they maintain this finish of the physique collectively.
The clip affords a fairly deep carry.
Nitecore features a lanyard, too.
Energy and Runtime
The Nitecore EDC07 flashlight is powered by a built-in 1500mAh LiPO battery. I didn’t disassemble the sunshine to take a look at that. Listed here are runtimes on varied modes.
The temperature traces in these charts are included as common context, not exact measurements. The values signify the vary (min to max) throughout testing, however shouldn’t be taken as actual readings. A temperature sensor just isn’t all the time connected to the bezel (and even the most popular spot, assuming that could possibly be outlined). Even with superb placement, too many variables have an effect on temperature to definitively state a particular max worth.
Charging
The Nitecore EDC07 flashlight affords USB-C charging. A charging port is on the pinnacle. This press-in charging port cowl appears loads just like the e-switch.
The quilt works superb, however I discovered it to be a bit fiddly and to get in the way in which.
Nitecore features a USB to USB-C charging cable.
A to C and C to C charging each work simply superb.
Modes and Currents
| Mode | Mode Claimed Output (lm) | Claimed Runtime | Measured Lumens |
|---|---|---|---|
| Turbo – Cool white | 1500 | 2h15m | 1510 (0s) 1127 (30s) |
| Excessive – Cool white | 300 | 2h45m | 286 (0s) 283 (30s) |
| Mid – Cool white | 80 | 11h | 81 |
| Low – Cool white | 15 | 52h | 14.9 |
| Ultralow – Cool white | 1 | 360h | 0.97 |
| Turbo – Impartial white | 1300 | 2h15m | 1374 (0s) 1178 (30s) |
| Excessive – Impartial white | 260 | 2h45m | 244 |
| Mid – Impartial white | 65 | 11h | 68 |
| Low – Impartial white | 13 | 52h | 12 |
| Ultralow – Impartial white | 1 | 360h | 0.81 |
| Turbo – Heat white | 1000 | 2h15m | 993 (0s) 703 (30s) |
| Excessive – Heat white | 220 | 2h45m | 194 |
| Mid – Heat white | 55 | 11h | 54 |
| Low – Heat white | 11 | 52h | 10 |
| Ultralow – Heat white | 1 | 360h | 0.58 |
Pulse Width Modulation
Under you’ll be able to see the charts for cool white output. The opposite two outputs had been simply the identical – no PWM to talk of.
Click on right here to see a “baseline” – a chart with virtually no mild hitting the sensor.
Then there’s the Ultrafire WF-602C flashlight, which has a number of the worst PWM I’ve seen. It’s so dangerous that I used a submit about it to elucidate PWM! Listed here are a number of timescales (10ms, 5ms, 2ms, 1ms, 0.5ms, 0.2ms) to make evaluating this “worst” PWM mild to the take a look at mild simpler. That submit additionally explains why I didn’t take a look at the WF-602C on the ordinary 50us scale.
Consumer Interface and Operation
There are two switches for working the Nitecore EDC07 flashlight. First is that this mechanical tail change. (Additionally beneath you may get an concept of how the 2 halves of the plastic physique join collectively.)
This appears like a really commonplace mechanical tail change and has the standard quantity of loudness.
Subsequent up is the e-switch on the pinnacle. It has an enormous “M” for “mode.”
Right here’s a person interface desk!
| State | Motion | End result |
|---|---|---|
| Off | Any e-switch motion | No change |
| Off | Click on tail change | On |
| Off | Faucet tail change | Momentary output |
| On | Click on e-switch | Mode advance (via 4 ranges) |
| On | Maintain e-switch | CCT advance (CW>NW>WW) |
| On | Click on tail change | Off |
| Off | Maintain e-switch, click on tail change | Ultralow |
| Holding e-switch via Ultralow | Proceed to carry e-switch | Advance via and memorize particular modes (Ultralow > Strobe > SOS) |
LED and Beam
The Nitecore EDC07 flashlight makes use of two of Nitecore’s personal quad-core MCT UHE LEDs. There’s a TIR for every emitter, they usually cannot be operated independently.
The plastic permits just a little bit of sunshine to shine via. I like this, although I can’t state cause to love it, or any helpful case for it to be this manner. Additionally beneath you’ll be able to see the battery indicator all inexperienced.
LED Colour Report (CRI and CCT)
Under you’ll be able to see CCT and CRI studies for 5 modes of every CCT. Cool and Impartial don’t actually maintain any surprises, however the heat white is pleasantly heat (across the claimed 3000K), and this can be very excessive CRI!! Nitecore does cowl this within the product web page, nevertheless it nonetheless appears to me to be an ignored facet. This mild needs to be promoted for having such a remarkably excessive CRI!! Take a look at the underside row beneath, and word how intently the crimson circle (the take a look at LED) matches the black circle (“excellent”). It’s so good!!
CCT (Correlated Colour Temperature) refers back to the measurement of the colour look of sunshine, expressed in Kelvins (Ok), which signifies whether or not the sunshine is heat (yellowish) or cool (bluish). A decrease CCT (beneath 3000K) is taken into account heat mild, whereas a better CCT (above 5000K) provides cooler, bluish mild.
CRI (Colour Rendering Index) is a measure of how precisely a lightweight supply renders colours compared to pure daylight. Scored on a scale from 0 to 100, larger CRI values point out that colours seem extra true to life and vibrant, just like how they might look beneath the solar.
Beamshots
These beamshots all the time have the next settings: f8, ISO100, 0.3s shutter, and guide 5000K publicity. These images are taken at flooring stage, and the beam hits the ceiling round 9 ft away.
Tint vs BLF-348 (KillzoneFlashlights.com 219b model) (affiliate hyperlink)
I maintain the take a look at flashlight on the left and the BLF-348 reference flashlight on the best. These images are taken round 18 inches from the door.
I examine every thing to the KillzoneFlashlights.com 219b BLF-348 as a result of it’s cheap and has the perfect tint!
Abstract and Conclusion
Very like the Nitecore EDC09, the 3000K output is the actual standout right here. It’s proper at 3000K (as claimed) and likewise very excessive CRI. That’s nice! The cool white is helpful if you happen to want larger output, although (and it does ship larger output!). I’m happy that this mild has an MSRP of simply $46 and hope the road worth can be within the mid $30s. At $30, I believe it is a good way to take a look at these excessive CRI MCT emitters by Nitecore!
The Large Desk
| Nitecore EDC07 | |
|---|---|
| Emitter: | Two quad-core MCT UHE LEDs (Multi-color emitters) |
| Worth in USD at publication time: | $45.95 |
| Cell: | Inner |
| Runtime Graphs | |
| LVP? | ? |
| Change Sort: | Twin |
| On-Board Charging? | Sure |
| Cost Port Sort: | USB-C |
| Cost Graph | |
| Energy off Cost Port | Sure |
| Claimed Lumens (lm) | 1500 |
| Measured Lumens (at 30s) | 1127 (75.1% of declare)^ |
| Candela per Lumen | 3.9 |
| Claimed Throw (m) | 132 |
| Candela (Calculated) in cd (at 30s) | 171lux @ 4.813m = 3961cd |
| Throw (Calculated) (m) | 125.9 (95.4% of declare)^ |
| Claimed CCT | Multi-color emitters Varied |
| Measured CCT Vary (Ok) | Multi-color emitters 3000-6200 Kelvin |
| Merchandise offered for assessment by: | Nitecore |
| All my Nitecore critiques! | |
^ Measurement disclaimer: Testing flashlights is my passion. I exploit hobbyist-level gear for testing, together with some I made myself. Attempt to not get buried within the particulars of producer specs versus measurements recorded right here; A certain quantity of distinction (say, 10 or 15%) is completely cheap.
What I like
- 3000K is a really excessive CRI!
- 3000K is even an possibility, such a pleasant possibility!
- Construct is interesting (I’m not precisely saying it’s “prime quality” or “nicely made” – I’m simply saying I actually prefer it)
- Cheap price
- We acquired a fifth mode when in comparison with a lightweight just like the EDC09!
What I don’t like
- The battery can’t get replaced
