The Focusworks EDC F3 Pumpkin Orange flashlight runs a 14500-cell and is on the market in lots of colours, together with this Pumpkin Orange! Learn on for testing!
Official Specs and Options
Right here’s a hyperlink to the Focusworks EDC F3 Pumpkin Orange flashlight product web page.
Variations
A search on FocusWorksEDC turns up 14 outcomes for the F3. Varied anodization colours can be found. On the very least, there have been two different metals, too: copper and titanium. Even among the many anodization colours, there are alternatives – some might be “distressed” (and look nice that approach!)
Two emitter choices can be found, too. There’s Samsung LH351d 5000K (seen right here), and Nichia 219c 4000K.
Any of these choices might be chosen with reminiscence or no reminiscence. A battery is on the market, too.
Value
The value varies from $185 all the best way as much as $300 (for titanium.) It appears just like the Focusworks EDC F3 Pumpkin Orange flashlight is on the lowest finish; $185.
Coincidentally, Focusworks EDC is operating a giveaway for the same gentle to the Focusworks EDC F3 Pumpkin Orange flashlight – it’s the F4 (and another gadgets. You’ll be able to enter right here!
What’s Included
- Focusworks EDC F3 Pumpkin Orange flashlight
Package deal and Handbook
The field is a step up from earlier variations in that it’s a field and never a tube. I don’t like tubes!
There’s no guide included, however you may see that QR code on the field above, which takes you to this webpage. For the Focusworks EDC F3 Pumpkin Orange flashlight, you’ll need this particular web page for the qlite driver.
Construct High quality and Disassembly
The Focusworks EDC F3 Pumpkin Orange flashlight has an fascinating design, notably when in comparison with the Focusworks EDC F2 Blood Orange flashlight (which I additionally reviewed). The F2 has a really swish “flashlight” design, whereas the F3 is usually extra tubular (particularly a straight tube).
Sure, there’s a little bit of aptitude within the head. There are additionally a few ridges on the top which are knurled – the one knurling on the sunshine. It’s in the precise place, although.
Inside the top, you may see the Qlite driver and what folks normally name a “Qlite spring.”
Whereas I’m no modifier of flashlights, I do consider (and it’s reported) that this driver may very well be swapped for another extra customizable driver (just like the Dr. Jones H17f).
Contained in the cell tube, you may see the McClicky spring. For the reason that cell tube is one piece and there’s no detachable tail cap, you’d want a particular instrument to take away this clicky.
Dimension and Comps
4-1/16″ (104mm) x 7/8″ (22mm) diameter
Weight with a battery 75g
If the flashlight will headstand, I’ll present it right here. If the flashlight will tailstand, I’ll additionally present that right here too!
Right here’s the take a look at gentle with the venerable Convoy S2+. The model beneath is a {custom} laser-engraved Convoy S2+ host by GadgetConnections.com. I did a full submit on an engraved orange host proper right here! Or go straight to GadgetConnections.com to purchase your Convoy S2+ now!
Within the photograph above, it’s possible you’ll notice that the SRM (normal reference materials) flashlight for comparability has modified! I used a TorchLAB BOSS 35 for ages. Now what you may see because the 18350 SRM is the Hanko Machine Works Trident. Whereas I’ve not reviewed or examined the Gunner Grip model seen right here, I’ve examined a Hanko Machine Works Trident Whole Tesseract in brass. I really like the Trident, and it’s a pleasant juxtaposition beside the cheap Convoy S2+, which I additionally love to make use of as an SRM.
Beneath you may see the F3 with the F2 (proper facet). Crucial level right here is the distinction between Pumpkin orange (f3) and Blood orange (F3). They’re each advantageous however the end of the blood orange F2 is extra to my style. It’s slicker or extra polished or one thing.
Each are implausible, although, and each are “orange sufficient.”
Retention and Carry
Included with the Focusworks EDC F3 Pumpkin Orange flashlight is a custom-made metal pocket clip.
This clip attaches with two Hex screws.
Anyway, this complete setup is outstanding. It’s a {custom} pocket clip that has implausible consideration to element.
For instance, take a look at the brushed end on this clip! Additionally, and very importantly, as you may see in some photographs above, the perimeters are completed. I’m unsure what Jordy of FocusWorks does to those (possibly a tumble!), however the edges don’t really feel like an afterthought and don’t really feel like they’re proper out of the machine that reduce them. They’re very good clips. Yet another level – take a look at the place the clip lands on the physique. It’s proper on a pleasant clean spot, so utilizing the clip (on pants pocket or no matter) could be very nice. I discovered the clip pressure to be ample and I didn’t fear concerning the gentle unintentionally leaving my pocket.
The screw holes go all over the tail, as you may see beneath. Simply by eyeballing a light-weight or two towards this pocket clip, I consider this to be normal SteelFlame pocket clip gap spacing.
That’s it – no magnet or lanyard or anything. The pocket clip does have a gap the place a lanyard might be hooked up, although.
Energy and Runtime
The Focusworks EDC F3 Pumpkin Orange flashlight runs on a single 14500-sized lithium-ion cell. It’s attainable so as to add considered one of these on the web site for buy for a further $13. I used this 850mAh Nitecore cell I had from different assessments.
The cell suits into the sunshine within the standard approach – optimistic finish (on this case “button finish”) towards the top. NiMH cells and different 1.5V cells don’t work on this gentle.
Listed below are runtime graphs for all three modes.
The sunshine does shut off with low voltage safety.
Modes and Currents
| Mode | Mode Claimed Output (lm) | Claimed Runtime | Measured Lumens | Tailcap Amps |
|---|---|---|---|---|
| Excessive | – | – | 645 | 3.00 |
| Medium | – | – | 225 | 0.87 |
| Low | – | – | 95 | 0.07 |
Pulse Width Modulation
PWM is seen by the oscilloscope on the decrease two modes (left) however the highest mode doesn’t have PWM. PWM on these decrease two might be quick sufficient that you simply’ll by no means discover it.
Right here you may see a “baseline” – a chart with virtually no gentle hitting the sensor.
Then there’s the Ultrafire WF-602C flashlight, which has a number of the worst PWM I’ve seen. It’s so unhealthy that I used a submit about it to elucidate PWM! Listed below are a number of timescales (10ms, 5ms, 2ms, 1ms, 0.5ms, 0.2ms) to make evaluating this “worst” PWM gentle to the take a look at gentle simpler. That submit additionally explains why I didn’t take a look at the WF-602C on the standard 50us scale.
Person Interface and Operation
Interplay with the Focusworks EDC F3 Pumpkin Orange flashlight comes by the use of a mechanical clicky within the tail finish. That is the stalwart of clicky switches – the McClicky!
Additionally, take a look at this brand change cowl with the FocusWorks EDC arrows. It is a very good contact.
The rubber boot cowl does not protrude previous the tail finish of the sunshine. Meaning tailstanding is straightforward and steady.
The driving force on the Focusworks EDC F3 Pumpkin Orange flashlight is a qlite driver. That’s a quite simple driver and does present an interface that virtually anybody can choose up and run with. However we aren’t simply anybody, and I can see how you may want extra. Whereas I didn’t do it, I can say that different drivers match into the capsule with relative ease. For instance, you can put into this gentle a Dr. Jones H17f and have programmability, many modes, and…. tons of choices. At that very same time, you would possibly choose to throw in an emitter from extra “present gen” just like the Nichia 519a.
Even when you did these issues, at $185, you may nonetheless get elements and carry out the work and are available out having spent lower than different comparable lights. (You would possibly even be inclined to purchase a light-weight such because the Acebeam Rider RX and driver/emitter swap into this physique. You get a pleasant “custom-type” gentle however with a driver supporting 14500 and AA cells!)
Right here’s a person interface desk! Notice that there are some choices you’d want to pick out from when shopping for your F3. You’ll be able to choose with or with out Reminiscence. I’ve the model with reminiscence.
| State | Motion | Outcome |
|---|---|---|
| Off | Click on | On (Reminiscence)^ |
| Off | Faucet | Mode choice^^ |
| On | Click on | Off |
| On | Faucet | No motion (as a result of it is a ahead clicky) |
^ It’s attainable to buy the sunshine with or with out reminiscence enabled.
^^ Repeated faucets cycle modes Low > Medium > Excessive. Faucets must be “collectively” – when you look forward to greater than a second or so, tapping will put you in the identical mode you’re already in. It’s very clear in apply however more durable to explain in textual content. Something right down to a “sluggish double click on” pace will suffice for mode altering. Something you’ll describe as being slower than the pace of a “sluggish double click on” can be too sluggish, and also you’ll reenter the identical mode.
LED and Beam
There are a few choices, however my copy of the Focusworks EDC F3 Pumpkin Orange flashlight has a Samsung LH351d in 5000K. That’s an ideal emitter and paired with the TIR, provides an ideal beam profile.
Singles are nice, too, and I really like them! And on this software – a 14500-cell gentle, it makes nice sense!
LED Coloration Report (CRI and CCT)
CRI and CCT are each good on this emitter – from round 4700K to round 4800K and round 89CRI. Duv is optimistic, which helps the concept that you would possibly see a little bit of inexperienced within the beam. It’s low (technically “close to zero” I suppose), although.
Beamshots
These beamshots are all the time with the next settings: f8, ISO100, 0.3s shutter, and guide 5000K publicity. These photographs are taken at ground degree and the beam hits the ceiling round 9 toes away.
Tint vs BLF-348 (KillzoneFlashlights.com 219b model) (affiliate hyperlink)
I hold the take a look at flashlight on the left, and the BLF-348 reference flashlight on the precise. These photographs are taken round 18 inches from the door.
I examine every thing to the KillzoneFlashlights.com 219b BLF-348 as a result of it’s cheap and has the very best tint!
Abstract and Conclusion
The Focusworks EDC F3 Pumpkin Orange flashlight is a really stable contender when you want a 14500-cell gentle. Should you’re in a position to modify flashlights, even higher – this gentle will actually stand out with one thing like a Nichia 519a and Dr. Jones H17f driver. I really like that there’s minimal knurling however it’s precisely in the precise place. The sunshine carries very comfortably, too. It’s gentle!
The Large Desk
^ Measurement disclaimer: Testing flashlights is my passion. I exploit hobbyist-level gear for testing, together with some I made myself. Attempt to not get buried within the particulars of producer specs versus measurements recorded right here; A specific amount of distinction (say, 10 or 15%) is completely cheap.
What I like
- Nice construct high quality
- I really like a single-emitter flashlight
- Person interface could be very easy
- Some very {custom} elements (change cowl, pocket clip)
- Carries very effectively
What I don’t like
- Qlite driver – h17f could be a better option for this (and any) gentle
- Emitter choices – Samsung LH351d looks like yesterday’s emitter
- Doesn’t assist AA cells
- Three modes should not sufficient modes!
- Doesn’t embody 14500 cell
Notes
Appreciated it? Take a second to assist zeroair on Patreon!
