Skilhunt M300 V4 F50S Flashlight Overview


The Skilhunt M300 V4 F50S flashlight makes use of Skilhunt’s personal F50S R9580 emitter and runs a 21700 cell. There are minor consumer interface updates, too. Learn on!


Official Specs and Options

Right here’s a referral hyperlink to the Skilhunt M300 V4 F50S flashlight product web page.

Variations

There are just a few variations of the Skilhunt M300 V4 flashlight. Even amongst this “V4” model, there are alternatives! Two emitters can be found: Luminus SFT70.2 and this Skilhunt F50S. Three physique colours can be found, too. These are black, blue, and inexperienced. The Skilhunt M300 V4 F50S flashlight could be bought with or with out a cell.

After all, that is V4, so different variations exist as effectively. I’ve reviewed the primary iteration of the Skilhunt M300 and V2 of the sunshine, as effectively.

Worth

As configured right here, the Skilhunt M300 V4 F50S flashlight is $55.23. There’s a greenback distinction in a few of the emitter choices, and the 21700 provides round $9. Purchase your Skilhunt M300 V4 F50S flashlight by way of my referral hyperlink!


What’s Included

Skilhunt M300 V4 blue flashlight what's included

  • Skilhunt M300 V4 F50S flashlight
  • Skilhunt 5000mAh 21700
  • Cost cable (USB to proprietary magnetic)
  • Lanyard
  • Pocket clip
  • Two battery extenders
  • Handbook
  • Spare o-rings (2)

Bundle and Handbook

Skilhunt M300 V4 blue flashlight box

Skilhunt M300 V4 blue flashlight box

Skilhunt M300 V4 blue flashlight manual

This handbook covers each emitter variations of the sunshine. Under, you’ll observe that I’ve just a few images of the black physique variant (overview upcoming) as a result of I missed a photograph right here and there. BIG due to Skilhunt for sending each emitter variations (and two physique colours, too!)

Construct High quality and Disassembly

Skilhunt M300 V4 blue flashlight

Skilhunts are normally well-built lights, and this one isn’t any exception. Perhaps, extra importantly, the design language between this and the opposite M-series lights may be very constant! So far as build-quality updates from the V2 that I reviewed – I don’t actually discover any variations thematically. The top is only a bit longer (discover one additional ridge within the head). Minor element variations, although.

I apparently didn’t get any images of the Skilhunt M300 V4 F50S flashlight with the physique elements eliminated. The top and tail each have springs, and the threads are very easy!

Measurement and Comps

123.5mm x 31.5mm and 89g (with out battery). That is general alightly greater than V2. Under are each V4 editions, although – one is black (overview upcoming) and this blue mannequin, too.

Right here’s the sunshine in hand:

Skilhunt M300 V4 blue flashlight in hand

Right here’s the check gentle with the venerable Convoy S2+. The model under is a customized laser-engraved Convoy S2+ host by GadgetConnections.com. I did a full submit on an engraved orange host proper right here! Or go straight to GadgetConnections.com to purchase your Convoy S2+ now!

Additionally within the photograph above, my Commonplace Reference Materials (SRM) flashlight is the Hanko Machine Works Trident, an 18350 gentle. Whereas I’ve not reviewed or examined the Gunner Grip model seen right here, I’ve examined a Hanko Machine Works Trident Whole Tesseract in brass. I really like the Trident, and it’s a putting distinction to the cheap Convoy S2+, one other nice SRM.

Retention and Carry

I didn’t get a pic of the Skilhunt M300 V4 F50S flashlight with the pocket clip connected, however right here’s the black physique model (overview upcoming) with the pocket clip. It is a two-way clip and lives solely on the tail finish of the flashlight.

Skilhunt M300 V4 F50S flashlight pocket clip

Additionally included is a lanyard, which attaches both by way of the pocket clip (much less really helpful) or the tailcap, the place there are holes for this categorical function.

Skilhunt M300 V4 blue flashlight lanyard hole

Skilhunt M300 V4 blue flashlight lanyard

The tailcap magnet is powerful sufficient to carry the sunshine in place.

Skilhunt M300 V4 blue flashlight magnet in use

Skilhunt included (individually) this little nylon pouch. I like this greater than I figured I’d, however because it was separate I’m not actually positive if it’s included with all purchases or not.

Skilhunt M300 V4 blue flashlight mesh pouch

Energy and Runtime

The Skilhunt M300 V4 F50S flashlight runs a single lithium-ion cell. My package deal included a 5000mAh 21700 button-top cell.

Skilhunt M300 V4 blue flashlight with cell

The cell goes into the sunshine within the regular means: constructive finish (button) towards the pinnacle.

Skilhunt M300 V4 F50S flashlight cell installed

Contained in the cell tube is a sticker indicating that the cell ought to go together with the constructive finish towards the pinnacle.

Skilhunt M300 V4 F50S flashlight cell sticker

Under you possibly can see quite a lot of runtime exams. Efficiency is superb. There’s a giant stepdown from T1 Turbo pretty rapidly, however after that, output may be very steady on the “T2” degree.

Skilhunt M300 V4 blue flashlight runtime charts

Skilhunt M300 V4 blue flashlight runtime charts

Skilhunt M300 V4 blue flashlight runtime charts

Skilhunt M300 V4 blue flashlight runtime charts

Skilhunt M300 V4 blue flashlight runtime charts

Low voltage safety was noticed in each check. The change begins blinking crimson at round 2.9-3V, after which the sunshine shuts off at round 2.8V.

The temperature strains in these charts are included as basic context, not exact measurements. The values symbolize the vary (min to max) throughout testing, however shouldn’t be taken as actual readings. A temperature sensor isn’t all the time connected to the bezel (and even the most popular spot, assuming that may very well be outlined). Even with excellent placement, too many variables have an effect on temperature to definitively state a selected max worth.

Charging

The Skilhunt M300 V4 F50S flashlight additionally has built-in charging. There’s a connector reverse the change. One finish is a USB plug, and the opposite is a proprietary magnetic connector.

Skilhunt M300 V4 blue flashlight charging connector

The connection works effectively. Notably, although not pictured explicitly, that is the “MC-20” charger. So far as I do know, all earlier iterations I’ve examined have been MC-10 chargers. There appears to be fairly a efficiency benefit to the MC-20, because it reaches a max present of round 2A.

Skilhunt M300 V4 blue flashlight charging connector

Charging works tremendous, and this 5000mAh 21700 requires round 4 hours.

Whereas charging, the charger blinks crimson, and when charging is full, the charger makes use of a blue indicator.

Skilhunt M300 V4 blue flashlight charging charts

Modes and Currents

Mode Mode Claimed Output (lm) Claimed Runtime Measured Lumens Tailcap Amps
T1 2200-700-390 2m+120m+30m 2167 (0s)
1926 (30s)
>12.00
T2 1300-700-390 3m+120m+30m 1210 (0s)
1205 (30s)
3.88
H 700-390 130m+30m 660 1.75
M1 250 7.5h 238 0.52
M2 90 21h 89 0.17
L 12 160h 13.4 40mA
UL 0.5 / 0.44 10mA

Pulse Width Modulation

There’s no PWM in any respect on any mode.

Skilhunt M300 V4 blue flashlight PWM charts

Click on right here to see a “baseline” – a chart with virtually no gentle hitting the sensor.

Then there’s the Ultrafire WF-602C flashlight, which has a few of the worst PWM I’ve seen. It’s so dangerous that I used a submit about it to clarify PWM! Listed below are a number of timescales (10ms, 5ms, 2ms, 1ms, 0.5ms, 0.2ms) to make evaluating this “worst” PWM gentle to the check gentle simpler. That submit additionally explains why I didn’t check the WF-602C on the normal 50us scale.

Person Interface and Operation

There’s a single change on the M300 V4. It’s a facet e-switch, with an indicator within the middle. It’s a giant, safe change, with a really constructive however quiet click on. I very very like this change. The change appears unchanged from the earlier iterations of the M-series.

Skilhunt M300 V4 blue flashlight switch lit red

The cutout for the change within the head is identical dimension because the cost connector, and whereas it’s onerous to tell apart between the 2 whereas holding the sunshine, I discovered that it didn’t matter; I’ll simply pinch the sunshine with each spots between my fingers and activate the sunshine.

The consumer interface may very well be a bit daunting, nevertheless it’s very easy if you get used to it. It’s additionally very logical and gives entry to low from off, which is as near a requirement from a consumer interface as I’ve. The consumer interface has modified a bit from earlier M-series Skilhunts (and different Skilhunts typically). I don’t love the replace. 🙁

Right here’s a consumer interface desk!

State Motion Consequence
Off Maintain Extremely Low
On Maintain Mode advance (excludes T1/T2/UL)
Any Click on 2x Turbo (Reminiscence of T1/T2)
Off Click on 4x Lockout (Three blinks of most important emitters to verify and the change turns crimson briefly)
Lockout Click on 4x Unlock to Extremely Low
Lockout Click on 2x Iterate lockout indicator^
Lockout Maintain Momentary Output (Seems to be Extremely Low)
On Click on Off
Off Click on On in “Fundamental Group” (Mode reminiscence L/M2/M1/H)
Fundamental Group Maintain Mode advance (L > M2 > M1 > H)
T1/T2 Maintain Iterate between T1 (increased) and T2 (decrease) output
T1/T2 Click on 2x Fundamental Group (reminiscence output)
Fundamental Group or Off Click on 3x Strobe Group (with reminiscence)
Strobe Group Click on 3x Earlier Group (T1/T2 or L/M2/M1/H, relying on the way you accessed Strobe Group)^^
Strobe Group Maintain Strobe Advance (S1 > S2 > S3)†
Off Maintain >5s Iterate proximity sensor disable/allow. Mild will activate to Extremely Low, then finally blink 3x (in UL) to point proximity sensor change. (Blink is identical when enabling or disabling the sensor. It’d be good to know which motion you’d simply taken. For instance, two blinks for allow, 4 blinks for disable, or one thing.)

^ Lockout indicator blinks a crimson change each 2-3 seconds.
^^ Apart from simply basic mode reminiscence (which you already know I don’t like), this appears to me to be the one place the place chances are you’ll want to instantly bear in mind what mode you had been in so you will have the expertise you anticipate. Nevertheless, the distinction is getting the 2 highest white outputs, or the 4 most important white outputs. Additionally observe that if you happen to entry the strobe group from off, triple-clicking is not going to return to off. For continuity, it ought to! The truth is, if you happen to accessed the strobe from an off state, a triple-click sends the sunshine to the Fundamental group!
† Strobes are like this:

S1: Disorienting strobe of White (turbo-ish)
S2: SOS (most important white, some mid-Excessive output)
S4: Beacon (one highish blink each second or so)

LED and Beam

This Skilhunt M300 V4 F50S flashlight makes use of Skilhunt’s personal F50S emitter. It’s a 5000K emitter that has R9580 traits. The reflector has an orange peel end and (one other enormous change in V4), a proximity sensor!

Skilhunt M300 V4 blue flashlight emitter

Out of all of the proximity sensors I’ve ever had, this one is certainly not the worst. It may be disabled!

Skilhunt M300 V4 blue flashlight reflector

Skilhunt M300 V4 blue flashlight emitter on

Skilhunt M300 V4 blue flashlight emitter on

Within the photograph under, you possibly can see the Skilhunt M300 V4 F50S flashlight (left) with the opposite emitter possibility (Luminus SFT70.2), proper.

Skilhunt M300 V4 flashlight emitters compared

LED Shade Report (CRI and CCT)

Skilhunt states this as a 5000K emitter nevertheless it measures a bit cooler than that. Nonetheless very nice, although! Ra of >95 and unfavorable Duv throughout the board. Nice specs!

CCT (Correlated Shade Temperature) refers back to the measurement of the colour look of sunshine, expressed in Kelvins (Okay), which signifies whether or not the sunshine is heat (yellowish) or cool (bluish). A decrease CCT (under 3000K) is taken into account heat gentle, whereas a better CCT (above 5000K) provides cooler, bluish gentle.

CRI (Shade Rendering Index) is a measure of how precisely a lightweight supply renders colours compared to pure daylight. Scored on a scale from 0 to 100, increased CRI values point out that colours seem extra true to life and vibrant, just like how they might look beneath the solar.

Beamshots

These beamshots all the time have the next settings:  f8, ISO100, 0.3s shutter, and handbook 5000K publicity. These images are taken at ground degree, and the beam hits the ceiling round 9 ft away.

Tint vs BLF-348 (KillzoneFlashlights.com 219b model) (affiliate hyperlink)

I hold the check flashlight on the left and the BLF-348 reference flashlight on the best. These images are taken round 18 inches from the door.

I evaluate the whole lot to the KillzoneFlashlights.com 219b BLF-348 as a result of it’s cheap and has one of the best tint!

Abstract and Conclusion

I suppose I’ve favored each M300 model. This one isn’t any totally different. The emitter is nice, the output is nice. That the proximity sensor could be disabled: nice. All of this gentle is nice! Skilhunt even obtained the value in line – it’s down round $20 from the V2 model (mid $50s now vs higher $70s then!) All of those are nice enhancements, and the Skilhunt M300 V4 F50S flashlight is a really stable offereing!

The Massive Desk

^ Measurement disclaimer:  Testing flashlights is my passion. I take advantage of hobbyist-level gear for testing, together with some I made myself. Strive to not get buried within the particulars of producer specs versus measurements recorded right here; A certain quantity of distinction (say, 10 or 15%) is completely affordable.

What I like

  • Nice dimension for a 21700-cell flashlight (even when a bit greater than earlier variations)
  • The button is completely clicky, and ‘pinch to click on’ reverse the cost port works properly too
  • Inbuilt charging works proficiently
  • The pocket clip is implausible (though it’s a two-way)
  • Excessive CRI
  • Nice CCT selection
  • Emitter choices for these preferring increased output or extra throw, or no matter.
  • Worth enchancment (aka lower) over earlier variations

What I don’t like

  • Charging requires a proprietary charger cable (however the gentle runs a regular 21700, so you can even use a bay-charger)
  • Person interface change strikes one of many low modes to the primary group (however nonetheless 7 ranges, which I do like)

Notes

Related Articles

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Latest Articles