REVIEW – I like to see all the distinctive designs and concepts that come out of Kickstarters. I’ve seen some extremely helpful and thought upsetting creations and I’ve seen a number of that had good intent however wanted extra time on the drafting board. The Pivot X Wrench, at this time’s evaluation, simply seems to be actually cool and has some actually intriguing options that I needed to see in motion. Learn on to see the way it held up!
⬇︎ Leap to abstract (execs/cons)
Value: $52.00
The place to purchase: Kickstarter (marketing campaign has ended)
What’s it?
The Pivot X Wrench is an on daily basis carry multitool with a bunch of distinctive additions.
What’s included?
Tech specs
- Weight: 105.5g
- Dimensions: 102x10x27mm / 4×0.39×1.06in
- Materials: 420 Stainless Metal
Design and options
There are a bunch of various features included within the design of this multitool. It contains an adjustable wrench that additionally can be utilized as calipers.
I needed to get away some precise calipers to take a look at the calibration and accuracy. The calipers on the wrench solely measure metric.
The screwdriver on this instrument is type of completely different. The instrument contains two bits, Phillips and flathead, which insert right into a slot on the wrench. I’m not an enormous fan of this design, as a result of whereas you should use it as a screwdriver, you possibly can’t get very deep into a tough to succeed in space. Additionally, in the event you push too onerous, it pushes the bit out of the again of the slot on the wrench. Because the bits are held on the instrument with a few magnets, additionally they pop off pretty simply in the event you drop it or knock it very onerous. I had so as to add a small rubber band to make sure that the bits stayed on.
Included glass-breaker is a pleasant addition to an EDC instrument. It’s a bit poky carrying round in a pocket, however I preferred having it there.
The included ruler can be in metric and measures as much as 4 centimeters. Take note of the tick marks on the bar, as I feel the digital calibration on that is off.
Belt/pocket clip. Out of the field, the clip is manner too unfastened and goes to fall off fairly simply. Pretty simple to tighten up when you’ve got the appropriate instruments, however once more, not nice out of the field.
Efficiency
The pry bar on the Pivot X is among the most fascinating additions on this instrument. I needed to take a look at it and see the way it held as much as precise use. The top on the pry bar has a small change to alter it to a 90 diploma angle.
90 diploma change.
I put three completely different nails right into a 2×4 board. I used to be fairly dissatisfied by the nail pulling efficiency. Not too stunned, provided that the pry bar is just 4 inches lengthy, so it doesn’t give a lot leverage.
This additionally uncovered a fairly critical flaw with the nail puller in that the cutout for the nail isn’t angled appropriately to actually get below a nail. It struggled with all three nails and I wasn’t capable of pull any of them out.
Instance of the nail puller not working for a nail. You can even see the opposite nail head that bought actually beat up in my makes an attempt to tug it out.
I used to be capable of get below a big galvanized nail, however I wasn’t capable of pull it out.
Remaining ideas
I feel that this multi-tool seems to be cool, however struggles on utilized performance. It’s really a fairly enjoyable fidget to play with after I’m sitting at my desk. Carrying it round in my pocket, the wrench would work its manner open and I’d must dial it again the subsequent time I pulled it out. The pry bar didn’t work for nails, however is ok for small issues in addition to that. I didn’t just like the screwdriver design simply because I don’t suppose it’s a really useful design. It seems to be cool, however I don’t suppose that I’d suggest it, not less than for the way I’d use it.
What I like concerning the Pivot X Wrench
- Appears to be like cool
- Having a transportable caliper is a pleasant addition
- A glass breaker will be invaluable in a pinch
What must be improved?
- Repair the nail puller on the pry bar
- Embody a clasp or sheath to maintain the bits from falling out
- Tighten up the belt/pocket clip
- Embody the inches measurement on the flip aspect of the caliper and ruler
Value: $52.00
The place to purchase: Kickstarter (marketing campaign has ended)
Supply: The pattern of this product was supplied free of charge by Pivot X. Pivot X didn’t have a closing say on the evaluation and didn’t preview the evaluation earlier than it was revealed.
Take a look at these different evaluations!
Love our content material?
Enroll for our e-newsletter at this time.
No advertisements, no spam, simply hyperlinks to our newest articles!
ESR for MagSafe Pockets, 5-Card Holder, Magnetic Pockets for iPhone, RFID Blocking, with 3,200 g Magnetic Energy, Vegan Leather-based, Slim for iPhone 17/16/15/14/13/12 Sequence, Not for 13/12 Mini, Black
35% Off $19.99 $12.99 (as of September 14, 2025 09:46 GMT -04:00 – Extra informationProduct costs and availability are correct as of the date/time indicated and are topic to alter. Any value and availability data displayed on [relevant Amazon Site(s), as applicable] on the time of buy will apply to the acquisition of this product.)
